Bypass iCloud Activation Lock iOS 8.1.3 / iOS 9.3.5

Bypass iCloud Activation Lock iOS 8.1.3 / iOS 9.3.5 with dns

Steps to bypass iCloud Activation lock:

1. First change the DNS server in your WIFI settings as 78.109.17.60 or use other IP address.
2. Now take your locked idevice and move to the last activation step and pick the 'Activation Help' option that is going to boot you through the ritual site. Now you have the interesting options like playing games, watching videos, internet, etc.

Steps To Completely Bypass iCloud Activation

1. Move over the 'Applications' option and tap the 'Crash Test 1'. This is going to reprising your stuff.
2. Move over to the WiFi settings and hit the 'i' and pick 'Manual' option over the 'http proxy' zone.
3. No list thirty distinct emoji icons to the 'Server' and type '8888' over the 'Port' zone.
4. Now hit back and then next, and move over the slide to unlock. Then hit the language options. Don't just click; rather click with an effort for some minutes so that it can be booted over the display.
5. As the home screen becomes available, you can now open three options, Phone, Newsstand and Facetime.
6. It is here to mention that now you have to put again a little more effort by holding Power and Home button each time you open and application to restart the product and facilitate the process.
7. Now go through Facetime where you can have the mail of the last user to whom you can contact through mail and enquire whether the device be taken of the iCloud. If you are not finding the mail, then continue the iCloud bypass process and go through the iPhone application to witness the contact number of the concerned person.

 

Read More

iPhone 7 Has Been Jailbroken

Read More

Famed Hacker iH8sn0w Releases 32-bit iBoot Patcher

Famed hacker iH8sn0w, who is the developer behind popular jailbreak tools such as Sn0wbreeze and P0sixspwn, has released an open-sourced version of his universal 32-bit iBoot patcher that works on iPhone OS 2.0 up to iOS 10.  
Many people have mistaken this release as an exploit that will allow 32-bit devices to be jailbroken, but unfortunately this is not the case. What has been released by iH8sn0w is a patcher for iBoot rather than an exploit. It allows patches to be applied to iBoot and works only if the CLI tool kloader is used.

The last jailbreakable firmware for 32-bit devices is iOS 9.0 – iOS 9.1, which can be done using pangu's jailbreak tool. The iOS 9.3.3 jailbreak which was released by the team a few months ago supports 64-bit devices only and Pangu already acknowledged that they have no plans in releasing a jailbreak for 32-bit devices.
Ever since the iPhone 5s was released, Apple moved towards 64-bit chip architecture, shifting away from the 32-bit architecture which is present in iPhone 5, iPhone 5c and earlier models. Since the architecture of 32-bit devices differ, it requires additional work by jailbreak developers to bring support for them. This coupled with the fact that 32-bit Apple devices form a small percentage of the market nowadays is the reason why jailbreak teams are unwilling to bring support for 32-bit.
Therefore, the take from today’s release by iH8sn0w is that it is by no means an exploit for 32-bit jailbreak. Instead, it is just a patcher for iBoot, so users shouldn’t get there hopes too high of a possible jailbreak.

Read More

Semi-Restore For iOS 5.0-9.1 without loosing data

Semi-Restore For iOS 5.0-9.1

 

 

 

Compatible with all jailbroken iPhone, iPod touch, iPad and iPad mini models running iOS 5.0 through 9.1.
 

 windows download

mac download

 

Requirements

• 5-10 minutes of your time!
• OpenSSH installed on your device
• A computer running 64 bit Windows, 64 bit Linux or 64 bit OS X

Important! Read this or you may regret it!

• SemiRestore supports Windows Vista 64 bit or higher.
• SemiRestore supports 64 Bit Linux (Ubuntu 14.04 or a higher equivilent distro).
• SemiRestore works on OS X 10.11 but may work on 10.9 and 10.10.
• Windows users must have iTunes 12 (not the one for older video cards), and .NET 4.0 or higher installed.
• Linux users must have libimobiledevice, GTK 3, libusbmuxd-tools, and openssl installed (which should be by default).
• Linux users must read the README file
• OS X users must read the README file.
• There may be a better way to fix your current problem. For example, to fix "Safe Mode" issues, you can just uninstall Mobile Substrate from Cydia.
• Like any other restore, make sure you backup your data if you want it later.
• Avoid using your iOS device or anything related to iTunes during the Semi-Restore. Why not actually go outside?
• This process can not and does not repair broken system files! Avoid all Siri Ports, as they are not only illegal (except for Spire on 5.0.1) but they also create problems and may potentially break system files (even Spire can cause this).
• Your device will respring or reboot several times during the Semi-Restore. This is perfectly normal, so don't panic.

Read More

iOS 10.1 Jailbreak by TaiG 

beta.

iOS 10.1 Jailbreak is not yet released as a complete Windows or Mac software, but the iOS users who run on iOS 10.1 can use Safari hacked iOS 10.1 Pre jailbreak with TaiG9. In order to perform iOS 10.1 jailbreak, users are requested to visit this page from iPhone, iPad or iPod.

How to Jailbreak iOS 10.1?[Step by Step Guide]

      . Step 1: read carefully

• Step 2 : Make sure that your device is running on iOS 10.1. In order to check the iOS version of your device, go to Settings > General > About and check the Version of the device.
• Step 3 : Launch Safari browser of your device.
• Step 4 : click jailbreak now (Make sure that you use the Safari browser of your device)
• Step 5 : Tap on “iOS 10.1 Jailbreak” button
• Step 6 : Wait for TaiG9 to connect to Pre Jailbreak Servers
• Step 7 : When asked tap “Continue Process” button
• Step 8 : Wait for the TaiG9 Process to download data to jailbreak your iOS 10.1 running iPhone, iPad or iPod.
• Step 9 : When the process completes downloading data, It will ask your permission to penetrate. Tap on “Penetrate Now”. Before starting the penetration process it will display you a message with “Jailbreak Process will be started, Please hang while we complete the process”. Tap OK to start the penetration process.
• Step 10 : Wait for the penetration process. The penetration process for iOS 10.1 may take up to 5 minutes. It depends on the device and the connection speed.
• Step 11 : Once the device penetrated, the popup will come to Install iOS 10.1 Jailbreak App. Install the app and enjoy iOS 10.1 Jailbreak(Pre)

                                                      jailbreak now

Read More

JAILBREAK IOS 9.3.5

BETA VER .

                                          

              


            
     CLICK JAILBREAK IOS 9.3.5


                           
TaiG9 and it is a combined effort of TaiG, 3K and iH8Sn0w. It is mandatory to perform pre jailbreak process of TaiG9 to perform post jailbreak, also known as full jailbreak for iOS 9.3.4 - iOS 9.3.5. Apple continuously preventing jailbreaks and what pre jailbreak does is installing a trusted root certificate to use in pre jailbreaking process. The iOS system will not block the certificate since the certificate does not try to access any system files within first 30 days. When the certificate is older than 30 days, TaiG9 post jailbreak process can be started to fully jailbreak iOS 9.3.4 - iOS 9.3.5. 

Pre Jailbreak iOS 9.3.4 - iOS 9.3.5 and make the certificate trusted

iOS 9.3.4 - iOS 9.3.5 Jailbreak (PRE) is a super easy process and all you need to do is visiting this page from your iPhone, iPod or iPad. Make sure that you use safari browser for the process. Once you visit this page from your device, you will be able to find iOS 9.3.4 - iOS 9.3.5 Jailbreak button. Also you can use the QR code above and find the jailbreak URL for iOS 9.3.4 - iOS 9.3.5. Open that URL from safari to continue.

STEP 1 : using safari browser of your iPhone, iPad or iPod.




   
          


         CLICK JAILBREAK IOS 9.3.5

STEP 2 : Wait for pre jailbreak process to complete and install 3K Assistant.

Read More

jailbreak ios 9.2 - 9.3.3

Jailbreak guide: for ios 9.2 -9.3.3
ios 9.3.5 not support

Preparation:

1. jailbreak IPA file DOWNLOAD

 2. Cydia impactor FOR WIN  DOWNLOAD  

                       MAC DOWNLOAD
(Special Note: This tool, developed by Saurik, is used to sign the ipa file so that Pangu jailbreak tool can be executed on iOS devices. Cydia impactors does not collect your apple id and password. All the information is only used for applying a personal free certificate from Apple.)
3. A computer (Cydia impactor runs on all major OSes, including Windows, OS X, and Linux)
4. A valid Apple ID. (In case that you do not want to use your current Apple ID to apply the personal certificate for any reason, we suggest you apply a new Apple ID and use it)

Option “Use embedded certificate effective until April 2017"

If you chose the option "Use embedded certificate effective until April 2017", Pangu 9 will install an app that is signed by a revoked certificate. Before April 2017, you will not need reinstall Pangu jailbreak app.

If you want to sign the app with your own certificate, do not select this option.

Limitations:

1. An Apple ID can only apply for a certificate for a limited number of devices.
2. The certificate will expire in 7 days. If your certificate gets expired, you need to follow the guide to install the jailbreak IPA again.

To Apple Developers:

If you have enrolled the Apple developer membership, signing the IPA file with your own developer certification is a better choice (i.e., Pangu jailbreak app will get expired in 1 year, rather than 7 days).

Jailbreak guide:

1. Unzip the Cydia impactor file and run it.





2. Connect your iOS device to your computer and trust the computer on your iOS device.










3. Drag NvwaStone_1.0.ipa into Cydia impactor app.

4. Input you email address( it’s your apple id)

5. Input your apple ID password.

6. Click OK button to continue.

7. Cydia impactor will automatically prepare everything based on your inputs and sign the IPA file. If everything is OK, the IPA file should be installed in your iOS device correctly. If you get error notifications, you probably input incorrect Apple ID or password.
8. On your device, Tap Settings > General > Device Management. You then see a profile for the developer under your “apple ID” heading. Tap the profile to establish trust for this developer. (An Internet connection is required to verify the app developer's certificate when establishing trust.)


9. On your device, find Pangu App and run it.


10. Click the "start" button to jailbreak your device.

 

Read More